Jump to content

2007 SLE DIC Upgrade

tobias

Recommended Posts

tobias Senior Enthusiast

tobias

Posted
Posted

I just wanted to let everyone know that adding the Driver Information Center (DIC) to your 2007 SLE is a snap.

 

I ordered the part from gmpartsdirect.com. The install took 5 minutes.

 

Directions (I would have taken photos but it's really unnecessary as this is so simple.)

*******************************************************************************

1. Turn the truck off.

 

2. Pull the old section of dash (on the left of the wheel) off by hand.

 

3. Remove the light controls (simple plastic clips).

 

4. Remove the extra cable clipped into the piece of dash (it's already there just not being used...YET!

 

5. Install the light controls into the new piece of dash (yes it comes with the new piece of dash, new vent and the switch)

 

6. Plug the previously non used wire into the new switch.

 

7. Put the new dash plate back into place by hand.

 

8. Turn on the truck! You're done!

 

 

This mod gives you access to fuel mileage, range, gallons used, V8/V4 mode notification, tire pressures, tire sensor learning, key fob learning, chime volume, entry and exit lighting schemes, lock and unlock schemes (including automatic lock/unlock), unit and language choices, engine hours and probably more that I have forgotten already.

 

The beauty of all of this is the cost - $100.22 shipped.

 

Enjoy.

 

If you have questions, let me know!

 

Daddy. :confused:

  • Replies 663
  • Created
  • Last Reply
mini1 Enthusiast

mini1

Posted
Posted

What happens to the standard trip-odometer type basic DIC controller? Does it still work? Can you order that panel in ebony black? I'm VERY interested! I assume all the wiring is already there? I'd like to see your finnished product.

tobias Senior Enthusiast

tobias

Posted
  • Author
Posted
What happens to the standard trip-odometer type basic DIC controller? Does it still work? Can you order that panel in ebony black? I'm VERY interested! I assume all the wiring is already there? I'd like to see your finished product.

 

I honestly haven't tried to use the original button for the original information but you get all of that through the new one. You lose no functionality whatsoever. The part I linked to is black, I have the full black interior and this is an OEM part. I can send you pics of the finished install but it looks just like the one in this link:

 

http://www.automobilemag.com/features/news...a/photo_03.html

 

It's just above and to the right of the light switch and just to the right of the vent.

 

Daddy.

mini1 Enthusiast

mini1

Posted
Posted

Can you try the factory switch and see what it does? I would like to see your install. Then I can see exactly what mine would look like.

 

Thanks!

tobias Senior Enthusiast

tobias

Posted
  • Author
Posted
Can you try the factory switch and see what it does? I would like to see your install. Then I can see exactly what mine would look like.

 

Thanks!

 

The old switch toggles between the trip odometer and the regular odometer, it appears that the tranny temp has moved over to the new switch.

 

I'll try and take some pics in a few minutes and post them although it won't look any different than the link I sent before.

 

Daddy.

tobias Senior Enthusiast

tobias

Posted
  • Author
Posted

Here are the pics. As I explained, it is very simple to do this as evident by the fact that I basically just did it again in order to take these pics.

 

This is the old piece of dash.

img0472wk6.gif

 

The red arrow shows the cable that is already there now attached to the switch.

img0476xq3.gif

 

Now for the new piece with the switch installed.

img0478rt9.gif

 

There are many more screens but here's a shot of the way the display is now used.

img0483dx4.gif

 

I hope this is enough to get the point across.

 

Did I mention that the switch is also back-lit to match everything else in the truck when the lights are on?

 

Daddy

tobias Senior Enthusiast

tobias

Posted
  • Author
Posted
Is there a cheaper place to buy these? Did you have to reset the tire pressure monitor?

 

I don't mean to sound rude but I don't think I could be any more clear that the entire upgrade took 5 minutes and nothing more than what I have explained. However, just for clarification's sake, no, I did not have to reset the tire pressure sensors or anything else for that matter.

 

If you want to search for it cheaper, feel free. To the best I was able to find them, this was the cheapest option. It's $100 for something that would have cost you much more to have on your truck from the dealer.

 

Daddy.

rogerf Enthusiast

rogerf

Posted
Posted

Help me understand something. What package did you buy that has a DIC without control switches? I just ordered a truck on Monday and I don't wan't this little detail overlooked.

tobias Senior Enthusiast

tobias

Posted
  • Author
Posted
Help me understand something. What package did you buy that has a DIC without control switches? I just ordered a truck on Monday and I don't wan't this little detail overlooked.

 

I have a SLE1 3SA with some additional options.

 

It shows on the GMC site that the DIC is standard but I believe that is referring to the limited use version that only gives odometer, trip odometer and tranny temp that i had prior to this upgrade. You'll probably need to ask the dealer to be certain.

 

Daddy.

Gozer Enthusiast

Gozer

Posted
Posted
Help me understand something. What package did you buy that has a DIC without control switches? I just ordered a truck on Monday and I don't wan't this little detail overlooked.

 

If you order the preferred package on Sierra SLE1 or convenience package on LT1 you should get the full DIC with contol switches to left of steering wheel.

tobias Senior Enthusiast

tobias

Posted
  • Author
Posted
Help me understand something. What package did you buy that has a DIC without control switches? I just ordered a truck on Monday and I don't wan't this little detail overlooked.

 

If you order the preferred package on Sierra SLE1 or convenience package on LT1 you should get the full DIC with contol switches to left of steering wheel.

 

 

That makes sense, I suppose. I got the convenience package but not the preferred.

 

 

Daddy

  • 4 weeks later...
slaphappy Enthusiast

slaphappy

Posted
Posted

Wow, thanks for this post! I've been searching all over trying to find a way to add the DIC to my 2007 Silverado LT.

 

A quick question though, is the dash plate the same for both the Sierra and the Silverado? Meaning, will the part linked to work for both?

 

Thanks!

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • KARNUT
      Missing thrust bearing? And oil selection

      By KARNUT · Posted

      I find it amusing the OP doesn’t realize this threads heading includes several engines. He should have posted in the off topic section if he wanted a more narrow focus. I really appreciate and find amusing that he actually pointed out one of my many vehicles. The Odyssey. That happens to use 0-20 oil. I love pushing his buttons. 
    • Black02Silverado
      Missing thrust bearing? And oil selection

      By Black02Silverado · Posted

      Maybe, but it seems he is the only one that has backed up data to prove what he is stating. I think he is doing this more because he enjoys it and wants to get the information out to us. He's got the knowledge and access to the proper equipment and having the funds doesn't hurt.  I would love to do what he is doing and would do it if and when I hit the Powerball.  I'm not a Tribologist by any means but love to learn what I can.   I would bet there would be doubting people out there if a completely independent lab with high quality work and highly respected in the automotive industry, put out information like this.  The world can't be pleased, one just has to take the information that they are given, do more of their own research to find actual lab data to back up what they are trying to figure/find out.  Most don't bother, they just want to believe what they first see.     I don't have the minimax but my 6.2 in my 2019 Silverado with 64k miles shows excellent UOA results with 0w-20 and for my own purposes 5w-20.  Since not much of a change using 5w. I liked the data sheet information on the SS 5w-20 and figured I would give it a try.  Still the same viscosity at 100℃.   In the end we all just do what makes us happy, life is too short to get upset over trivial social media.   On a side note, I do feel GM has dropped the ball and just cares about the bottom dollar and not quality anymore.  "Like a Rock" has been long gone.  Seems "Built Ford Tough" has as well.
    • Tyler Gibbs
      Thoughts on these wheels?

      By Tyler Gibbs · Posted

      Better than stock but that's like putting lipstick on a pig
    • flattop
      2026 sierra bad brake controller

      By flattop · Posted

      Hello, my 3 month old Sierra Elevation wont recognize a trailer with electric brakes? All the lights work correctly, but no power to the brakes?   This is the factory installed brake controller. If you manually push the knob, the display shows the power % but does not light up like my 2022 silverado.   I have an appointment with the dealer, but was checking to see if anyone else has seen this issue.    Thanks, 
    • Black02Silverado
      Post your latest oil change.

      By Black02Silverado · Posted

      Been using SS 0w-20 from new, but wanted to change to the 5w-20 because I liked the data on the data sheet, to me it seems like a little better product. But as you can see, not much difference. This is also with running a mix of 10 gallons E85 to a tank topped with 93. It isn't a flex fuel vehicle so any higher I get a CEL for running lean on both banks. Yes my mileage takes a hit. Instead of 20 mpg I normally get on trips I get 17mpg. This is also using EaO17 filter.  What is amazing is I have the AMSOIL cone filter on it since I have the GM Performance intake installed and that air filter has 44k miles on it.  I just take it out and shop vac it off once a year.  I use the upholstery tool on my shop vac.  Works well.   

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...